Motherboard GIGABYTE B860 DS3H WIFI6E

Motherboard GIGABYTE B860 DS3H WIFI6E

• CPU Sockel: LGA1851 socket: Support for Intel Core Ultra Processors
• Chipset: Intel B860 Express Chipset
• Memory:
  • Support for DDR5 9066(O.C)/8800(O.C) /8600(O.C) / 8400(O.C) /8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400 / 5600 MT/s memory modules
  • 4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory
  • Dual channel memory architecture
  • Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
  • Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
  • Support for Extreme Memory Profile (XMP) memory modules
• Integrated Graphics Processor-Intel HD Graphics support:
  • 1 x HDMI 2.1 port, supporting a maximum resolution of 4096x2160@60 Hz
  • 1 x DisplayPort 2.1, supporting a maximum resolution of 3840x2160@144 Hz
• Audio: Realtek Audio CODEC 2/4/5.1/7.1-channel
• LAN: Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
• Wi-Fi 6E Communication module:
  • WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
  • BLUETOOTH 5.3
• Expansion Slots:
  • CPU:
    • 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
  • Chipset:
    • 4 x PCI Express x16 slots, supporting PCIe 4.0 and running at x1 (PCIEX1_1~PCIEX1_4)
• Storage Interface:
  • CPU:
    • 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU)
  • Chipset:
    • 1 x M.2 connector (Socket 3, M key, type 25110/22110/2580/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB)
    • 4 x SATA 6Gb/s connectors
    • RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
• USB:
  • Chipset:
    • 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2x2 support
    • 1 x USB Type-C® port with USB 3.2 Gen 1 support, available through the internal USB header
    • 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
    • 2 x USB 3.2 Gen 1 ports available through the internal USB header
    • 4 x USB 2.0/1.1 ports on the back panel
  • Chipset+USB 2.0 Hub:
    • 4 x USB 2.0/1.1 ports available through the internal USB headers
• Internal I/O Connectors:
  • 1 x 24-pin ATX main power connector
  • 1 x 8-pin ATX 12V power connector
  • 1 x CPU fan header
  • 1 x CPU fan/water cooling pump header
  • 2 x system fan headers
  • 2 x system fan/water cooling pump headers
  • 3 x addressable RGB Gen2 LED strip headers
  • 1 x RGB LED strip header
  • 2 x M.2 Socket 3 connectors
  • 4 x SATA 6Gb/s connectors
  • 1 x front panel header
  • 1 x front panel audio header
  • 1 x S/PDIF Out header
  • 1 x USB Type-C header, with USB 3.2 Gen 1 support
  • 1 x USB 3.2 Gen 1 header
  • 2 x USB 2.0/1.1 headers
  • 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only)
  • 1 x serial port header
  • 1 x Q-Flash Plus button
  • 1 x reset jumper
  • 1 x Clear CMOS jumper
• Back Panel Connectors:
  • 1 x PS/2 keyboard/mouse port
  • 1 x HDMI port
  • 1 x DisplayPort
  • 1 x USB Type-C port, with USB 3.2 Gen 2x2 support
  • 1 x USB 3.2 Gen 2 Type-A port (red)
  • 4 x USB 2.0/1.1 ports
  • 1 x RJ-45 port
  • 2 x antenna connectors (2T2R)
  • 3 x audio jacks
• I/O Controller: iTE I/O Controller Chip
• H/W Monitoring:
  • Voltage detection
  • Temperature detection
  • Fan speed detection
  • Water cooling flow rate detection
  • Fan fail warning
  • Fan speed control
• Form Factor: ATX Form Factor; 30.5cm x 24.4cm